Showing posts with label mods. Show all posts
Showing posts with label mods. Show all posts

Tuesday, April 2, 2024

2023 Husqvarna 701 Enduro T-Rex skid plate and crash bars install


After searching the internet for the options on skid plate and crash bars for my 2023 Husqvarna 701 Enduro I decided to go with the T-Rex kit (Part Number: N167-16EG + N167-16SP). This kit did not claim to fit my bike exactly but rather KTM 690 Enduro/Supermoto and Husqvarna 701 Supermoto of years prior to mine.  I contacted the company and asked about it fitting my bike.  I worked out a deal to try it out.  


Before installing it I weighed the components so I could later compare to what I removed.
  • Skid plate - 53.5oz
  • Left crash bar - 32.5oz
  • Right crash bar - 34.7oz
  • Attaching hardware - 22.2oz
142.9oz or 8.93lbs.  I also weighed the factory plastic skid plate assembly and it came in at 25.4oz and 8.7oz of removed mounting hardware for a net weight gain of 6.8lbs.  The added weight is fairly low on the bike, the skid plate being the heaviest single component and also the lowest. 

The install was very easy and straightforward.  It took less than 20 minutes I would guess.  Here is a video of the install.

It fit the bike well and offers the protection I was looking for. The crash bars are simple and don't go as high as others but will likely take most of the hit if I drop the bike on either side, protecting the radiators. 
The skid plate has extensions on both sides that help protect the side cases from objects from the front.  They even offer some protection from dropping the bike on the side depending on the surface.



While it would have been convenient to use the original sockets to catch the back of the skid plate, the T-Rex design is much more robust.
Between the skip plate and crash bars, the water pump looks well protected now.

I like the lower position of the crash bars, both to keep the weight down low, and since this is a much stronger design than other bars.
I like the design of these crash bars compared to many others I have seen.  The cross bar is positioned well to prevent branches and other things from getting captured by the bars when riding.  It will tend to deflect them away.  









Saturday, July 29, 2023

Use an old smartphone for bike navigation

 


I enjoy mountain biking off-road and often in areas with no cellular.  Sometimes I ride in areas with many established trails that cross each other and navigation would help.  I looked into bike navigation but they have small screens, are costly, and many of the features are redundant with my Garmin fenix 6x Pro Solar watch.  I also never trade in my old smartphones so I have several fairly recent ones laying around.  I decided to use my old Motorola Z4 smartphone as a biking navigation using.  First I needed a real robust mount.  I started on Amazon and found this one


It grabs all 4 corners and locks in place.  

I cleared and reset the phone, removing all unnecessary apps to minimize battery consumption.  I also put it in airplane mode, and keep WiFi and Bluetooth off to save power.  The Moto Z4 I am using also supports MotoMod batteries, of which I have a few.  I am using the 2200mAh unit primarily and I can hot swap in others if it gets low on the trail (which is unlikely).  I could also connect the phone to the USB port in the bike display to keep it charged if I wanted.  I removed the SIM card as well so it would not search for cellular even out of airplane mode.  Then I installed Google Maps, Trailforks, Garmin Explore, and GAIA maps.  All of these offer offline maps of bike trails.  There are many others too.  So far I found GAIA to be the best for bike navigation as it can ever store satellite maps offline. 

Here is how I organized the home screen.   


Here is what GAIA maps looks like.

Here is a video showing the use of this riding some trails.

This first ride was on a pretty easy trail.  I have yet to test it on harsher rides but so far it seems solid.  I am of course by no means the first person to do this.  I wanted to use an old phone, and not my current phone, just in case that mount breaks or I crash the bike.  Also, I didn't want to drain the battery on the phone I use normally since I want to be able to make calls, or message through my Garmin satellite messenger in case of trouble.  









Sunday, February 23, 2020

The future of aftermarket performance

I have been modifying cars since I was a teenager.  My first was a 1972 Ford Bronco where I rebuilt a 351W engine, upgrading the camshaft, installing a larger carburetor, and headers, to replace the 302.  I installed nitrous oxide on my 1968 Mustang, along with many other mods.  I helped a friend develop a custom turbo system for his Fox mustang.  I installed many superchargers at the Ford Dealer I worked at for 15 years.  I also was a dealer/installer for Allen Engine Development and Explorer Express superchargers.  I developed a low budget custom turbo system for my BMW 318i.  I have also done engine performance tuning on many cars.  I have worked with most types performance enhancements over the years.  I know the pros and cons of the various aftermarket power adders.

I am becoming more and more convinced that the future is in aftermarket hybrid systems.  I am not talking about plug-in hybrid focused at fuel economy here.  I am talking about performance focused hybrid performance enhancements.  Think F1 KERS for the street or track.  This is by no means a new concept.  Think back to the Porsche 918, Ferrari LaFerrari, and McLaren P1.  All three were hybrids.  In the supercar space, more hybrids are coming too.  There is even a company, Vonnen, that has developed the first aftermarket hybrid system for Porsche sports cars now.  While that system has a huge price tag, I expect this approach to eventually go mainstream and the prices to come down quickly.

There are many opportunities once you have a high-voltage electric system in the car.  The Vonnen system eliminates the old heavy starter motor, and replaces the heavy lead-acid 12V battery to reduce the weight penalty down to about 100lbs.  While the Vonnen system puts the motor/generator between the engine and transmission, the motor/generator could instead (or also) be placed at each of the axles which would allow for torque vectoring.  You can also electric drive superchargers to boost the engine performance as well with no back work of traditional supercharging or turbocharging (more net power with less boost).  Unlike superchargers or turbochargers, hybrid drive will not affect the engine durability, tuning, emissions, or sound either.  Performance focused hybrid systems do not require a large heavy battery pack.  Instead, the Vonnen system uses a 1kWh battery pack (versus the 100kWh battery pack of a Tesla Model S 100). Ultra-capacitors can also be used to augment these performance oriented hybrid systems with a low weight penalty and very high power rates in and out.  The battery and/or capacitor weight can be strategically placed in the vehicle too, optimizing balance and handling. Other features can be added such as silent drive for short distances (depending on battery capacity) so you don't wake everyone up in your neighborhood when you start your performance car.  Large capacity electric heaters can augment the HVAC in cold climates to give instant heat before the engine warms up, also making the defrost work better.  Speaking of HVAC, the belt driven AC compressor can be replaced with an electric compressor and be more strategically placed in the vehicle. Hydraulic power steering can be replace with efficient electric power steering, which can include advanced features such as Porsche's advanced electric power steering.

Motors are getting better all the time too.  Equipmake for instance, recently developed a 295HP motor that weights only 22lbs. With all kinds of advanced motor technology, higher voltages, and advanced manufacturing techniques, motors will continue to become lighter, more powerful, and once they show up in volumes, less costly.  Leveraging this development from mainstream manufacturers, the aftermarket can adapt these motors to the aftermarket performance sector to make a cost effective performance enhancement system. Most of these modern motors can also generate electricity to charge the propulsion batteries and/or capacitors.

Motors can be placed in many different areas to provide power where desired and to enable enhanced stability and traction control strategies such as torque vectoring, stop/start, anti-stall, and more.  A motor that drives the engine crank can also be used to stabilize very high performance engines with large aggressive cams to make the car more drive-able.  A great example of that is the Aston Martin Valkyrie.  Hybrid assist is used to make this 1000HP naturally aspirated engine street drive-able.  Motors that are connected to the engine can also assist in changing engine speeds, making the engine rev much quicker.  Motors used in generating mode can be used as retarders for descending hills and decelerating, saving brake heat and wear.

Looking at trucks and off-road vehicles the advantages grow even more.  Drive motors can be placed to drive each wheel independently (or assist) to allow precise torque control for rock climbing and advanced traction control.  High-voltage electric winches will be far more compact, light, and powerful than their 12V counterparts. Trailers can also be equipped with drive motors so an off-road vehicle can tow a trailer and still have all wheels driven to get through very poor traction conditions.

One of the challenges facing aftermarket performance systems and kits is dealing with the implications to emissions and associated regulations.  Hybrid systems would be far easier to deal with here as most would not impact emissions, or would favorably impact emissions, especially in grams/mile impact.  The Vonnen system for instance does not change any engine or powertrain tuning. 

Hybrid and battery electric vehicles have now been around in volumes for over a decade.  More vehicles will go hybrid and full battery electric going forward.  As hybrid and electric drive go mainstream, the cost of this technology will drop substantially.  In some cases, the factory components could be incorporated into aftermarket hybrid systems which will really help reduce cost while also using proven, validated components.  Hybrid drive is not the doom of performance cars but rather the next level.  The future of performance vehicles and aftermarket performance enhancements has never been brighter.

Wednesday, January 1, 2020

Moto Z4 Review

A few months ago I upgraded my aging Moto Z2 Play with the new Moto Z4 (unlocked).  I chose this device for several reasons:

  • Industry best total battery life (when used with battery mod)
  • Supports Moto Mods
  • Reasonable price and value for the money
  • They also threw in the Moto 360 camera with it and I always wanted one of these
  • Decent cameras with good features
I would consider this an upper mid-range phone.  It's not a true flagship device but it is not priced like one either.  My daughter got one a couple months before I did and she liked it too.  My experience with it so far has been very good.  I have been impressed with the cameras, and overall performance is good.  I like the in-display fingerprint sensor even though it is much slower than the one on the Z2 Play.  It is nice having almost no bezels and the larger display.


I did have to open up the headphone port and charging port on this rim with a file bit other than that it works great and lets you use most mods while this rim is in place.  It also fixes the minor annoyance where the Z4 body is just a bit narrower so the mods slightly hang over the edge. The only mod that does not work with it is the 360 camera.  I just modified the 360 camera (quick job on the table saw) to make it fit.

I would like to discuss battery life as this is one of the most important features for me.  Moto Mod batteries have a mode called "efficiency mode" that optimizes maintaining the phones internal battery to keep it at 80% extending its life.  I have 2 Moto Mod batteries: The Moto Power Pack and the Moto Turbo Power Pack. I always have one of them on the phone.  For normal daily use, I use the smaller Moto Power Pack.  When I go on trips or will be using more battery, or going longer between changes, I will use the larger Moto Turbo Power Pack.  Switching is of course super easy and does not require turning OFF the phone.  You simply pull one off and snap the other one on. These batteries also protect the camera since the battery has a hole leaving the camera recessed.  The batteries also have a great rubbery back surface making it easy to hold the phone securely and they don't show finger prints at all. I never really need to charge during the day.  Even with heavy use I can go all day no problem. I generally have 80% phone, and 50% to 80% of the mod battery at the end of a typical day. When traveling, I will sometimes carry my other battery so it is available just in case I do get low.  The mod batteries are super thin and fit easily into a pocket.

When I went looking for a new smartphone my top considerations were this Z4 and the new Pixel 3a XL.  The deal breaker for the Pixel for me was the small battery.  The Z4 by itself has 100mAh less battery but then you add the mod with 2200mAh to 3500mAh to that and the capacity is much more.  The pixel also lacks expandable memory that the Z4 has. The Z4 has a very slightly better processor too.  The Pixel is only $25 less (comparing full original retail prices).  The Z4 also has a slightly larger screen.  One of the things that interested me in the Pixel over the Z4 was the cameras, which are rated very well on the Pixel.  Here is an article comparing these 2 devices, and another here, and yet another here.. Another family member got the Pixel 3a XL at about the same time. I will be honest both phones get great pictures and I can't see a big difference between them.  Motorola phones have almost completely stock Android too so even that is very similar, mostly identical really. 5G support was not even a passing thought for me.  I live in a smaller town that does not have it anyway and I get crazy fast speeds on 4G already.

I may add some more details later....

Saturday, January 6, 2018

Moto Z2 Play Review



You may have seen my post last summer as we were starting to shop for cell phone upgrades.  We ended up getting a Moto Z2 Play Verizon edition in August and then a Moto Z2 Play unlocked in December.

Moto Z2 Play Verizon has 32GB storage, 3GB RAM, and Verizon's bloatware.  It retails for $408.  We got it with a special discounted Kate Spade battery mod.  We bought this one in August

Moto Z2 Play unlocked has 64GB storage, 4GB RAM and no bloatware.  It retails for $499 but I got it on sale for $349. We bought this one in December.

Battery Life and Battery Mods

I have read several early reviews of these devices complaining that they shrunk the battery.  Apparently these people have not actually used these devices daily long enough.  Battery life is never a problem.  First of all, these are not really meant to be used without a mod attached.  They feel ridiculously thin and they are slippery without a mod attached.  They also look silly with no mod.  The obvious mod to get is a battery mod.  I bought the basic 2200 mAh battery mod for $37 at Best Buy on sale (regularly $49.99).  With the mod attached the phone feels about the right thickness and the mod has a great grip.  Now the phone has 3,000 mAh internally and with the 2,200 mAh mod you now have a total of 5,200 mAh which is much more than the vast majority of phones out there.  The battery mod features a special efficiency mode which helps use the phones battery in a way that preserves its life.  It uses the phones battery first until it gets to 80% state of charge, then it uses the mod battery to 0%, then switches back to using the phone battery.  At the end of a typical day both batteries are at about 80%.  I have had days where it barely used the mod.  This phone is very efficient with its energy use!  I was shocked how little battery it used even with heavy use.  I just purchased the Moto Turbo Power Pack mod for $79.99 and got a free Insta-Share projector mod free.  This Moto Turbo Power Pack has 3,490 mAh.  That makes the total battery capacity a whopping 6,490 mAh on a phone that is very battery efficient.  I don't think there is a better device for battery life.  Those articles complaining that this phone lost battery life are nuts.  Also, I keep seeing articles complaining that phone manufacturers are too focused on thin and not enough on battery life apparently don't understand this device.  With this Moto Z2 you can have it your way.  Want thin, remove the mod.  Want battery life, you have many to choose from.  You can switch in an instant.  It is the best of both worlds.  Also, you can swap out the mod while the device is powered in a second with no interruption.

There are many battery mods to choose from.  You can get inexpensive ones.  You can get them with wireless charging.  You can get them with Quick Charge.  You can even get designer battery mods such as the Kate Spade mod.  More may come in the future as well.

Other thoughts on battery life

 I did some basic extrapolation based on my battery use.  I estimated I could go over 4 days without plugging in using the 2,200 mAh battery mod.  The 3,490 mAh battery mod would take it to about 6.  This is with my typical use.  

Batteries do degrade over time.  The best way to maintain a phone battery is keep it between 60% and 80% state of charge.  I also suspect that quick charging has a negative impact on the durability of the battery.  The great thing about the Moto Mod battery system is that the mod battery is taking the biggest hit.  You deep cycle it the most meaning it will be the first to degrade.  When this happens you simply by a replacement battery mod and snap it on.  No installation required.

The other thing to consider is how quickly you can charge this up.  The Motor Turbo Power Pack quick charges using Qualcomm Quick Charge 3 or USB-C.  It has its own USB-C port so you can plug it into one charge and the phone into another at the same time.  The combination can charge at 30W.  This means you can get a bunch of added time with only a short charge.  Say you are in an airport between flights and you want another 8 hours of battery, you can quick charge them both and get that in less than 10 minutes.  

Display

I am very happy with this display.  My last phone was a Moto X Pure which was LCD.  Its great being back on AMOLED!  So much crisper.  Colors are deeper.  

Speed

So far this has been very snappy.  We have had the Verizon edition since August with a very heavy user and it is still snappy.

Software

One of the reasons I keep coming back to Motorola is because they use vanilla Android without all the nasty pointless skins and bloatware that others pile on top.  The unlocked Moto Z2 has only a few very useful Motorola features such as Moto Display, Moto Actions, and Moto Voice.  The reviews on Motorola devices often rightfully praise this aspect, as do I.  The Verizon locked Moto Z2 Play does have Verizon bloatware and that is unfortunate.  The very first thing you will want to do with the locked version is replace the launcher.  I use the Google Now Launcher.

Other Mods

Other than batteries the only mod I bought was the Insta-Share Projector.  Well, I actually got it from with the Moto Turbo Power Pack mod which I paid $79.99 for.  That was a great deal as this Insta-Share mod usually costs $299 by itself.  I made a short video about this mod.
When I first saw this mod it seemed like it may have occasional uses but probably not worth the price.  It is actually pretty neat.  I could see many uses for someone wanting to present to a small group.  It is much thinner than I had expected.  When you attach it to the phone, you can still slip you phone into your pocket fine.  It is less bulky than I would have expected.  In that video I am projecting about 75" diagonal I would guess.  I have the room lights dim, as you normally would for a projector.  It does chew up its battery fairly fast but you can plug it in for longer presentations or movies.  

I have seen too many reviews of the Moto Z phones that almost make fun of the mods, and ignore them being an integral part of this phone product line.  The Moto Z is not meant to be used without a mod attached in my opinion.  Any review that complains about the slippery back or exposed connector just don't get this product line at all.  In my opinion all the reviews should have included at least a basic battery mod since this is likely how nearly all users will actually use this device.  With a 2,200 mAh battery mod attached, this phone feels about right as far as thickness and grip.  It does make it a bit heavier than most but then again its packing some serious battery power too.  Personally I like the weight as it feels quality and I can easily tell its in my pocket so I don't leave it places on accident. 

Update 3/2019: This thing is still working great.  Battery life seems the same as new.  I don't have to think about charging.  I am in the habit of charging each night and I never need to charge any other time.  The phone is still snappy and glitch free.  

Comparison to Moto X Pure

Both of these phones replaced Moto X Pure.  By 18 months the Moto X Pure had terrible battery life and it became very laggy at times.  Even after 12 month there was a noticeable performance loss and battery life loss.  We could not make it past lunch time without charging.  Those devices had a Snapdragon 808 processor and the Moto Z2 Play has a 625.  It seems like there are huge battery efficiency gains in the 625 versus the 808.  The phone performs far better too.  The software and OS are also upgraded on the Moto Z2 Play.  I waited forever to get Android 7 on my Pure.  I finally just side-loaded it one day but it did not perform better.